HP Z820 IEEE-1394b PCI Express Card Installation - Page 3

Download and install updates, Accessing the internal components of the computer, Removing components - manual

Get HP Z820 PDF manuals and user guides View all HP Z820 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Step 1-Preparing for component installation NOTE: Workstation models vary. All illustrations are examples only. Download and install updates 1. Check for available system BIOS updates specified for your HP workstation model and operating system at http://www.hp.com/go/workstationsupport. 2. Install the system BIOS updates, if available. Accessing the internal components of the computer 1. If you need help preparing the computer for this installation, consult the removal and replacement procedures in the service guide for your computer at http://www.hp.com/support/manuals. 2. Power down the computer, and then disconnect the power cord. 3. Power down all external devices, and then disconnect them from the computer. 4. Remove the side access panel. Removing components 1. Some workstations may have card hold-down supports installed. If any card support is present, remove it for access to the expansion slots and system board connectors. 2. Select an appropriate PCIe expansion slot and remove the slot cover. The IEEE-1394b card may be installed in any unused PCIe expansion slot. IMPORTANT: For the HP Z210 CMT Workstation, only use PCIe slots 3, 4, or 5 for your 1394b card installation. For the HP Z210 SFF Workstation, only use PCIe slots 1 or 2 for this installation. NOTE: To identify PCIe expansion slots, see the service label on the side access panel. Figure 1 Removing the expansion slot cover ENWW Step 1-Preparing for component installation 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
Step 1—Preparing for component installation
NOTE:
Workstation models vary. All illustrations are examples only.
Download and install updates
1.
Check for available system BIOS updates specified for your HP workstation model and operating
system at
go/workstationsupport
.
2.
Install the system BIOS updates, if available.
Accessing the internal components of the computer
1.
If you need help preparing the computer for this installation, consult the removal and replacement
procedures in the service guide for your computer at
support/manuals
.
2.
Power down the computer, and then disconnect the power cord.
3.
Power down all external devices, and then disconnect them from the computer.
4.
Remove the side access panel.
Removing components
1.
Some workstations may have card hold-down supports installed. If any card support is present,
remove it for access to the expansion slots and system board connectors.
2.
Select an appropriate PCIe expansion slot and remove the slot cover. The IEEE-1394b card may
be installed in any unused PCIe expansion slot.
IMPORTANT:
For the HP Z210 CMT Workstation, only use PCIe slots 3, 4, or 5 for your
1394b card installation.
For the HP Z210 SFF Workstation, only use PCIe slots 1 or 2 for this installation.
NOTE:
To identify PCIe expansion slots, see the service label on the side access panel.
Figure 1
Removing the expansion slot cover
ENWW
Step 1—Preparing for component installation
3