HP dv6t HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 100
Remove one Phillips PM2.5×4.0 screw, Fingerprint reader board cable
![]() |
UPC - 884962159323
View all HP dv6t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
3. Remove one Phillips PM2.5×4.0 screw (2) that secures the top cover to the computer. This screw is in the battery bay. 4. Turn the computer right-side up, with the front toward you. 5. Disconnect the following cables from the system board: (1) TouchPad cable NOTE: On computer models equipped with a standard display assembly, this cable connects to a ZIF connector on the system board. On computer models equipped with a Flush Glass display assembly, this cable connects to a LIF connector on the system board. (2) Fingerprint reader board cable NOTE: This cable connects to a LIF connector on the system board. (3) Speaker cable NOTE: Step 6 applies only to computer models equipped with standard display assemblies. 92 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-dv61230us-hp-pavilion-dv6-entertainment-pc-maintenance-service-guide-1-ecad315/100.png)