HP dx2040 Computer Setup (F10) Utility Guide - Page 15

Computer Setup-PC Health NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 6 Computer Setup-PC Health Option Description Current CPU Temperature Current System Temperature System Fan Speed Smart Fan Function (view only) (view only) (view only) Disables/enables smart fan functionality. Computer Setup-Exit Table 7 Computer Setup-Exit Option Description Save & Exit Setup Allows you to save current settings and exit Computer Setup. Exit Without Saving Allows you to exit Computer Setup without saving changes. Load Optimized Defaults Allows you to reset Computer Setup to factory defaults. Recovering the Configuration Settings Recovering the configuration settings established in the Computer Setup (F10) Utility requires that you first back up the settings before a recovery is needed. The CMOS Save/Load utility can be found at http://www.hp.com under the Software & Driver Downloads for your specific model. Download the firmware files into a folder on a removable storage device. It is recommended that you save any modified computer configuration settings to a diskette, a USB flash media device, or a diskette-like device (a storage device set to emulate a diskette drive) and save the diskette or device for possible future use. Backing Up the CMOS 1. Make sure the computer to be backed up is turned on. Connect the removable storage to the computer. 2. Boot to DOS. 3. Type N:\folder\BIOS.exe SAVE:ABC001.DAT (where N is the drive letter of the removable storage) to save the CMOS setting to the removable storage device. ENWW Recovering the Configuration Settings 9