HP dx2200 HP Compaq dx2200 Microtower PC - Computer Setup (F10) Utility Guide - Page 15

Computer Setup-Power Management Setup NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 7 Computer Setup-Power Management Setup Option Description After AC Power Loss Allows you to select system power loss behavior: ● On ● Off ● Last State ACPI Suspend Type Allows you to set type of ACPI sleep mode: ● S1 (Power On Suspend) ● S3 (Suspend To RAM) ● S1 & S3 Wake on PCI Device from S5 Disables/enables PCI S5 on power on. External Modem S5 Wake-Up Disables/enables wake-up modem from S5. RTC Alarm Resume Disables/enables RTC (real-time clock) alarm. Date (of Month) If RTC Alarm Resume is enabled, allows you to select the day of the month for resumption of RTC alarm. (Set to 0 for every day.) Resume Time (hh:mm:ss) If RTC Alarm Resume is enabled, allows you to select what time the RTC alarm will resume. Computer Setup-PnP/PCI Configurations NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 8 Computer Setup-PnP/PCI Configurations Option Description Reset Configuration Data Disables/enables automatic reconfiguration. The default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup, if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the OS cannot boot. Resources Controlled By Allows you to select whether resources are controlled automatically or manually: ● Auto (ESCD-Extended Storage Configuration Data) ● Manual BIOS can automatically configure all the bootable and Plug-and-Play-compatible devices. If you choose Auto, you cannot select IRQ, DMA and memory base address fields since BIOS automatically assigns them. ENWW Computer Setup (F10) Utilities 9