HP dx2818 Computer Setup (F10) Utility Guide - Page 8
Caution - bios
![]() |
View all HP dx2818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc. CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen. Computer Setup-Main NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 1 Computer Setup-Main Option Description System Time System Date Floppy Diskette A: 1st Drive 2nd Drive 3rd Drive 4th Drive System Information Allows you to set system time. Allows you to set system date. Allows you to set drive A to: ● Disabled ● 1.44 MB 3.5" ● Not Installed For each, allows you to: ● (view only) ◦ Capacity (Size - HDD only) ◦ Transfer Mode ● Smart Support - run HDD self-test for selected channel: ◦ SMART Status Check ◦ SMART Short Self-Test ◦ SMART Extended Self-Test (view only) ● CPU Type ● CPU Speed ● Cache RAM ● Installed Memory ● Memory Bank 1 ● Memory Bank 2 ● Memory Bank 3 ● Memory Bank 4 ● BIOS Revision ● Core Version 2 Computer Setup (F10) Utility ENWW
![](/manual_guide/products/hewlettpackard-dx2810-setup-f10-utility-guide-b4e7853/8.png)