HP f890g Quick Start Guide - Page 1

HP f890g Manual

Page 1 highlights

Battery Warning Never dismantle, crush, or pierce the battery, or allow the battery to short-circuit. Do not expose battery being placed in high temperature environment, if battery leaks or bulges, stop continue to use. Always charge using the system. Risk of explosion if battery is replaced by an incorrect type. Keep the battery out of reach of children. Batteries may explode if exposed to open fire. Never dispose of batteries in a fire. Never replace the battery on your own; have the dealer do it for you. Disposed of used batteries observing local regulations. Notes on Installation 1. Please measure the front windshield viewing area, make sure not to block driver's front view, install the camcorder below the rearview mirror (the central, higher right position of the front windshield). And we recommend that the sky and the land occupied by the screen 50%, fix the car holder and then adjust the camcorder so that the lane is aligned with the screen. Proper installation enables the camcorder to maximize the efficiency also can enhance the accuracy of LDWS. 2. Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains. 3. Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear videos or pictures. Clean the lens on a regular basis. 4. Do not install the camcorder on a tinted window. Doing so may damage the tint film. 5. Make sure that the installation position is not hindered by the tinted window. 6. This product is suitable for light windshield or light color heat-resistant film windows , it will affect video quality if install it on the dark windows or dark heat-resistant film windows. 7. Use the products of the attached power charger only, please do not use other brand power charger, in order to avoid equipment burn or cause the battery explosion. For more operation details, please refer to CD-ROM. 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

1
Battery Warning
°
Never dismantle, crush, or pierce the battery, or allow the battery to
short-circuit. Do not expose battery being placed in high
temperature environment, if battery leaks or bulges, stop continue
to use.
°
Always charge using the system. Risk of explosion if battery is
replaced by an incorrect type.
°
Keep the battery out of reach of children.
°
Batteries may explode if exposed to open fire. Never dispose of
batteries in a fire.
°
Never replace the battery on your own; have the dealer do it for
you.
°
Disposed of used batteries observing local regulations.
Notes on Installation
1.
Please measure the front windshield viewing area, make sure not to
block driver's front view, install the camcorder below the rearview
mirror (the central, higher right position of the front windshield). And
we recommend that the sky and the land occupied by the screen
50%, fix the car holder and then adjust the camcorder so that the
lane is aligned with the screen. Proper installation enables the
camcorder to maximize the efficiency also can enhance the accuracy
of LDWS.
2.
Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3.
Do not touch the lens with your fingers. Finger grease may be left on
the lens and will result in unclear videos or pictures. Clean the lens
on a regular basis.
4.
Do not install the camcorder on a tinted window. Doing so may
damage the tint film.
5.
Make sure that the installation position is not hindered by the tinted
window.
6.
This product is suitable for light windshield or light color
heat-resistant film windows , it will affect video quality if install it on
the dark windows or dark heat-resistant film windows.
7.
Use the products of the attached power charger only, please do not
use other brand power charger, in order to avoid equipment burn or
cause the battery explosion.
For more operation details, please refer to CD-ROM.