HP iPAQ Legacy-free PC P866/815e Quick Setup and User's Guide - Page 36
Disabling the Autosensing Capabilities, Installing Network Drivers
View all HP iPAQ Legacy-free PC P866/815e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Accessing the Internet & Using Network Communications If Remote Wakeup is enabled, the link/activity light will remain functional even when power to the Personal Computer is turned off. Disabling the Autosensing Capabilities Autosensing NICs automatically determine the maximum network operating speed of the attached network and configure themselves accordingly. The Personal Computer begins autosensing whenever it loses a valid network link, for example, if the cable is disconnected. In addition to determining the network operating speed, the Personal Computer determines if full-duplex is supported. Full-duplex systems can transmit and receive information on the network simultaneously. Half-duplex systems cannot transmit and receive simultaneously. If necessary, you can disable the autosensing capabilities and force the system to operate in one mode only. 1. Select the Network icon, located in the Control Panel. 2. Select the appropriate NIC in the list box and click Properties. 3. Change the Speed and Duplex values from Automatic/Auto Duplex to the appropriate values, depending on the capabilities of your network. ✎ 4. Exit the Network control application. You will be prompted to restart Personal Computer in order for the changes to take effect. 100Base-TX operation requires the use of Category 5 UTP cable with an RJ-45 network connection. Installing Network Drivers ✎ The device drivers in the network software enable the Personal Computer to communicate with the network. Device drivers are supplied for the Microsoft Windows NT version 4.0 and Windows 95, Windows 98, or Windows 2000 operating systems, depending on which system was preinstalled on the Personal Computer. If you are using another operating system, device drivers may be installed from diskettes included with the network operating system or are available from Compaq. If reinstallation of the operating system ever becomes necessary, use the Compaq Restore CD. Quick Setup & User's Guide 4-3