HP nx6125 Computer Setup - Page 5
Computer Setup Defaults, File > Restore defaults, Restore defaults, File > Save Changes and Exit
View all HP nx6125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Computer Setup Defaults To return all settings in Computer Setup to the values that were set at the factory: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ To view navigation information, press f1. 2. Use the arrow keys to select File > Restore defaults, and then press enter. 3. Select the Restore defaults check box, and then press enter. 4. To confirm the restoration, press f10. 5. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen. Your preferences are in effect when the computer restarts. ✎ Your password- and security-related settings are not changed when you restore the factory default settings. Computer Setup 3