HP nx7000 HP Compaq Business Notebook nx7000/Compaq Presario Widescreen Notebo - Page 100
system board., Board for instructions on removing the internal memory
View all HP nx7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Removal and Replacement Procedures 7. Lift the rear edge of the keyboard, swing it up and forward 1, and rest it on the top cover. 8. Release the ZIF connector 2 to which the keyboard cable is attached and disconnect the keyboard cable 3 from the system board. Disconnecting the Keyboard Cable 9. Remove the keyboard. Reverse the above procedure to install the keyboard. After the keyboard is removed, the internal memory expansion board connector is accessible. Refer to the "Memory Expansion Board" section for instructions on removing the internal memory expansion board. Maintenance and Service Guide 5-17
Removal and Replacement Procedures
Maintenance and Service Guide
5–17
7.
Lift the rear edge of the keyboard, swing it up and forward
1
,
and rest it on the top cover.
8. Release the ZIF connector
2
to which the keyboard cable is
attached and disconnect the keyboard cable
3
from the
system board.
Disconnecting the Keyboard Cable
9. Remove the keyboard.
Reverse the above procedure to install the keyboard.
After the keyboard is removed, the internal memory expansion
board connector is accessible. Refer to the “Memory Expansion
Board” section for instructions on removing the internal memory
expansion board.