HP nx9500 Startup and Reference Guide: Enhanced for Accessibility - Page 112
External Devices, Connecting a Monitor or Projector - driver
View all HP nx9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Hardware Options and Upgrades External Devices The jacks and connectors described in this guide support standard external devices. ■ For information about which jack or connector to use, refer to the documentation included with the device. ■ For information about installing or loading any software, such as drivers, required by the device, refer to the documentation included with the device. To connect a standard external device to the notebook: 1. Turn off the notebook. 2. If you are connecting a powered device, turn off the device. 3. Connect the device to the connector on the notebook. 4. If you are connecting a powered device, plug the device power cord into a grounded electrical outlet. 5. Turn on the device. 6. Turn on the notebook. To disconnect a standard external device from the notebook, turn off the device, and then disconnect the device from the notebook. Connecting a Monitor or Projector To connect an external monitor or projector to the notebook, insert the monitor cable into the external monitor connector on the back of the notebook. ✎ If a properly connected external monitor or projector does not display an image, try pressing the fn+f4 hotkey to switch the image to the monitor. 8-2 Startup and Reference Guide-Part 2