HP rp3410 Internal Cabling Guide for HP Smart Array Controllers - Page 53

Configuring the Server Firmware and Software for RAID, - memory

Get HP rp3410 PDF manuals and user guides View all HP rp3410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Cabling for the HP Integrity rx2620 and rx2600 Servers Configuring the Server Firmware and Software for RAID Figure 5-19 RAID Cable Routing Through the PCI Cage Board Cover Step 15. Connect the free end(s) of the RAID cable(s) from the controller card to the backplane. The cable connectors are marked. Step 16. Reinstall the iLO Manageability Card and power supply connectors. Step 17. Reinstall any DIMMs that were removed back into their memory banks. Step 18. Lower the fan power bridge. Step 19. Reinstall fans 2 and 3. Step 20. Replace the metal system cover. Configuring the Server Firmware and Software for RAID To complete the installation and set up RAID for your server's internal hot swap drives, follow the procedures given in the HP Smart Array Controller User Guide: • Configure your HP Smart Array controller card in an HP Integrity server (use HP Smart Array utilities and command line options from the EFI shell) • Install and use the operating system-specific HP Smart Array utilities and software that help you manage your RAID • Configure the HP Smart Array controller card for an external RAID storage system Chapter 5 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Cabling for the HP Integrity rx2620 and rx2600 Servers
Configuring the Server Firmware and Software for RAID
Chapter 5
49
Figure 5-19 RAID Cable Routing Through the PCI Cage Board Cover
Step 15.
Connect the free end(s) of the RAID cable(s) from the controller card to the backplane. The cable
connectors are marked.
Step 16.
Reinstall the iLO Manageability Card and power supply connectors.
Step 17.
Reinstall any DIMMs that were removed back into their memory banks.
Step 18.
Lower the fan power bridge.
Step 19.
Reinstall fans 2 and 3.
Step 20.
Replace the metal system cover.
Configuring the Server Firmware and Software for RAID
To complete the installation and set up RAID for your server's internal hot swap drives, follow the procedures
given in the
HP Smart Array Controller User Guide
:
•
Configure your HP Smart Array controller card in an HP Integrity server (use HP Smart Array utilities
and command line options from the EFI shell)
•
Install and use the operating system-specific HP Smart Array utilities and software that help you
manage your RAID
•
Configure the HP Smart Array controller card for an external RAID storage system