HP rp3440 HP DTC Cabling and Racking Guide - Page 20
Racking a DTC 72MX with a system rack front panel
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4 Racking a DTC 72MX with a system rack front panel Racking a DTC 72MX with a system rack front panel The DTC 72MX can be racked in standard 19" EIA racks, including HP system racks. Each DTC 72MX occupies three EIA units. (DDPs and MDPs will occupy additional EIA units). The DTC 72MX is delivered with brackets attached for mounting in a rack. The system rack front panel fits onto the "snaps" attached to these brackets. To simplify cable management, the DTC 72MX should be racked at the front of the system rack, with the front facing outwards. This also ensures that you can see the diagnostic LED displays on the front of the DTC when you need to test the DTC or interpret faults. Note If you want to rack your DTC 72MX in an HP cabinet, you must use the HP C2788A rail kit. 1 Mount the side brackets on the DTC (if they are not already attached). 2 Attach the front-panel snaps to the brackets. 14