HP rp7440 HP DLPI Programmer's Guide - Page 92
Dl_ok_ack, Dl_error_ack
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
DLPI Primitives Local Management Primitives DL_OK_ACK Acknowledges to the DLS user that a previously issued request primitive was received successfully. It is only initiated for those primitives that require a positive acknowledgment. Format The message consists of one M_PCPROTO message block, which contains the following structure. typedef struct { ulong ulong } dl_ok_ack_t; Parameters dl_primitive dl_primitive; dl_correct_primitve; DL_OK_ACK dl_correct_primitive identifies the successfully received primitive that is being acknowledged. State The message is valid in response to a DL_ATTACH_REQ, DL_DETACH_REQ, DL_UNBIND_REQ, DL_CONNECT_RES, DL_RESET_RES, DL_DISCON_REQ, DL_SUBS_UNBIND_REQ, DL_PROMISCON_REQ, DL_ENABMULTI_REQ, DL_DISADMULTI_REQ, DL_HP_HW_RESET_REQ, DL_HP_RESET_STATS_REQ, or DL_PROMISCOFF_REQ from any of several states as defined in Appendix B, Allowable Sequence of DLPI Primitives, of the DLPI 2.0 specification. New State The resulting state depends on the current state and is defined fully in Appendix B, Allowable Sequence of DLPI Primitives, of the DLPI 2.0 specification. DL_ERROR_ACK Informs the DLS user that the previous request or response was invalid. 92 Chapter 2