HP rp8420 HP-UX 11i v3 Dynamic nPartitions - Features and Configuration Recomm - Page 4
Dynamic nPartitions commands - memory
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Base cells and floating cells A cell is eligible for online deactivation if and only if it is designated as a floating cell. Any cell not specifically designated as a floating cell is a base cell. HP-UX before 11i v3 included support for base cells only. A base cell cannot be online deactivated. The system administrator designates a cell as a base cell or floating cell using the nPartition commands. Designation as a floating cell has two important implications. First, a floating cell can never contain any interleaved memory. 100% of the memory on a floating cell is cell local memory. Second, the operating system cannot place certain vital data elements in memory on floating cells. This precaution ensures that the operating system can continue to run at optimal performance if the floating cell is online deactivated. The core cell for an nPartition is a base cell; therefore, every nPartition must contain at least one base cell. The system administrator might designate additional cells as base cells so that the operating system can have more memory in which to place its vital data elements. A cell can be online activated as a base cell. In that case, it always contains 100% cell local memory, but it cannot subsequently be online deactivated. A cell's designation as base or floating can be changed while the cell is active, however the change cannot take effect until the partition is rebooted. Similarly, the fraction of cell local memory on a base cell can be changed while the cell is active, but the change cannot take effect until the partition is rebooted. Dynamic nPartitions commands The static nPartition commands have been augmented with a new command, parolrad, to invoke cell online operations. This section gives the basics for the command. The full details are available in the manual pages. The parolrad command can operate upon remote partitions, but all examples discussed here are for operations upon the local partition. That is, the partition running the operating system on which the parolrad is invoked is the target of the cell online operation. The command for cell online activation is parolrad -a cell_identifier where cell_identifier specifies the cell to be online activated. The cell_identifier can be a global slot number or in the form cabinet number/slot number. It is required that the specified cell already be assigned to the local partition and be in the inactive state. The command for cell online deactivation is parolrad -d cell_identifier where cell_identifier specifies the cell to be online deactivated. It is required that the specified cell be an active floating cell in the local partition. Examples of the use of these commands are given in the appendix Illustrated example of online cell migration. As an alternative to the command line interface, Dynamic nPartitions operations can also be initiated through the Partition Manager graphical user interface tool. In fact, the Partition Manager provides full support for all of the operations used to manage cell-based HP servers. Documentation for the tool is available on the Web. I/O chassis A cell can have an I/O chassis attached to it. Depending on the model of the server, a cell can also have core I/O associated with it. 4