HP s3700f Getting Started Guide - Page 27
Connecting 4.1 (Four speakers and a subwoofer) audio speakers
UPC - 884420456322
View all HP s3700f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Step 8 is optional for a two-speaker setup. 8 After the speakers are connected to the computer, configure the audio software for sound output for your computer model. See "Connecting Speakers or Microphone." Type 3: See "Configuring speakers with Realtek HD Audio Manager." Type 6: See "Configuring speakers with Realtek HD Audio Manager." Type S (audio card): See "Using the Creative Sound Blaster X-Fi or X-Fi Fatality audio card." The following diagram shows a typical 2.1 audio installation: Connecting 4.1 (Four speakers and a subwoofer) audio speakers To connect two front speakers, two rear speakers, and a subwoofer for four-channel (4.1 speaker) output: 1 Turn off the computer. 2 Connect the front speaker cable to the lime green Audio Line Out connector that matches the back of your computer. 3 6 S NOTE: Type 3 is three connectors. Type 6 is six connectors. Type S is sound card. 3 Connect the rear speaker cable to the black connector that matches the back of your computer. 3 6 S For type 3-connector systems, the blue Audio Line In connector functions as a Rear Line Out when a multichannel audio configuration is activated. Connecting Speakers or Microphone 19