HP s3712f Advanced Setup Guide - Page 28
Speaker types, Connecting 2/2.1 (Two speakers and a subwoofer) audio speakers
UPC - 884420464822
View all HP s3712f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Speaker types Speakers may be included with the monitor (select models only) or are sold separately. Refer to the product documentation for your speakers. Your computer supports only an active (powered) speaker system. An active speaker system must have its own power cord. A home audio system does not require active speakers, because the receiver provides amplification. A stereo speaker set is a left-right, two-channel speaker system. A multichannel audio speaker system has a left-right front and left-right rear channel, and it may include a subwoofer and a center speaker. Side speakers are included in more advanced systems. A subwoofer provides enhanced bass sounds. ".1" indicates a subwoofer. For example, 7.1 channels refers to an eight-speaker mode and uses two front speakers (left-right), two side speakers (left-right), two rear speakers (left-right), a center speaker, and a subwoofer. Connecting 2/2.1 (Two speakers and a subwoofer) audio speakers To connect simple left/right stereo active speakers or two speakers and a subwoofer for two-channel (2.1 speaker) output: 1 Turn off the computer. 2 Connect the speaker cable to the lime green Audio Line Out connector that matches the back of your computer. 3 6 S NOTE: Type 3 is three connectors. Type 6 is six connectors. Type S is sound card. 3 Connect the cable to the audio system. For 2.1 speakers that were shipped with your computer (select models only), connect the Audio Line Out connector to the subwoofer. 4 Connect the left and right speakers to the subwoofer. Refer to the speaker documentation. 5 Turn on the computer. NOTE: Always turn on the computer before you turn on the speaker system. 6 Plug in the speaker system power. 7 Turn on the speaker system. 22 Advanced Setup Guide (features vary by model)