HP sb21 HP Digital Projectors xb31 and sb21 - (English) Owner Manual - Page 10
installation - power cord
View all HP sb21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
installation Connecting the hp digital projector xb31 to a computer xb31 Connect the power cord to the projector and a power outlet. Connect the black end of the video cable to the projector. Connect the blue end of the video cable to the PC; optionally, to have the remote control function as a mouse, connect the USB connector to the PC. Start the projector; after a 30second warm-up it will search for a video signal. If no video signal is found, you may need to set up the PC to send a video signal out the video port. CAUTION! Unplugging the projector while the fan is running may reduce lamp life. NOTE: For best performance, configure the display mode of your computer's graphic card to 1024×768 resolution. Ensure the timing of the display mode is compatible with the projector. Refer to the "hp xb31 compatibility modes" section on page 35. 10