HP sb21 HP Digital Projectors xb31 and sb21 - (English) Quick Start Guide - Page 1

connecting the projector 1. Make sure the projector and your computer are turned off. 2. Unplug the mouse from the computer. 3. Connect the projector signal cable to the projector and to either the RGB or digital port on the computer. Tighten the screws. 4. To enable the remote control’s mouse features, connect the projector signal cable USB connector to the computer. 5. Connect the projector to other video sources. 6. Connect the power cord to the projector and the power source. 7. Turn on the projector first and then the computer. powering the projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. 3. Press the “POWER ON/OFF” button on the control panel. The startup screen will be displayed for 30 seconds and the blue POWER indicator light will light up. 4. Turn on your video source (computer, notebook, video player, etc.). The projector will detect your source automatically. 1. power cord 2. M1-A to VGA and USB cable 3. 2.5mm mini phone jack for composite video cable 4. USB Mini-B 5-pin for S-video input cable 5. M1-D to DVI-D and USB cable (optional) 6. M1-A to HDTV/ component and USB cable (optional) ! CAUTION! Unplugging the projector while the fan is running may reduce lamp life. video output 4 S-video output antenna 6 digital tuner output 3 USB DVI RGB 2 5 1 1. lens cap 2. power ON/OFF button 3. lamp warning indicator light 4. temperature warning indicator light 5. source button 2 6. menu ON/OFF button 3 7. auto image button 8. four directional select buttons 4 8 5 6 7 1 hp digital projector sb21