HP t1000 T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 29
Connect the power supply output cable to the Power connector.
View all HP t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
6 Terminal Installation Proceed as follows to connect the terminal. (If necessary, remove the desktop mounting stand (one Phillips-head screw on the bottom.) Note Before connecting the cables, decide which mounting configuration will be used and ensure that the cables are of the correct lengths. If permanent desktop configuration is to be used, drill the desktop mounting holes before connecting the cables. 1. Connect the monitor to the Video connector. 2. Connect the keyboard to the Keyboard connector. 3. Connect the mouse to the Mouse connector. 4. If you will be using a network connection, connect a 10Base-T or 100Base-T network cable to the Network connector. Be sure to install the supplied noise suppressor on the cable. 5. Depending on your configuration needs, connect a printer to the parallel port, and/or connect a modem/server serial cable to the serial ports, as appropriate. 6. Connect the power supply output cable to the Power connector. Caution Do not force a connector into its socket. If any undue resistance is encountered, ensure that the connector is oriented correctly to the socket. 7. Plug the AC cord into the power supply, then into an AC outlet. 8. After the cables are connected, install the terminal in its planned location (see the next section "Mounting the Terminal").