HP t1000 T1500/T1510 Windows-based Terminal Network Installation Guide - Page 13

Overview, Introduction, How to Use This Guide, References

Get HP t1000 - Terminal Thin Client PC PDF manuals and user guides View all HP t1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Overview Introduction This guide explains how to install software from the installation CD onto your server and how to configure the resources resident on the server to support Compaq T1500/T1510 Windows-Based Terminals for this software release. How to Use This Guide For full access to all the terminal resources, you will need to plan and configure your server setup as explained in Chapter 1 of this guide. If you want only to verify basic operation of the terminal using local boot, go directly to the quick-start procedure in Appendix A. However, you will have only limited access to the terminal resources. Terminal setup information is available from help files resident on the terminals and complete instructions are available on line after terminal-server communication is established. References The following Requests for Comments (RFCs) should be reviewed: Note RFCs are freely available through the World-Wide Web. They can be accessed from sites such as: http:// www.cis.ohio-state.edu/hypertext/information/rfc.html

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Overview
Introduction
This guide explains how to install software from the installation CD onto your server
and how to configure the resources resident on the server to support Compaq
T1500/T1510 Windows-Based Terminals for this software release.
How to Use This Guide
For full access to all the terminal resources, you will need to plan and configure
your server setup as explained in Chapter 1 of this guide.
If you want only to verify basic operation of the terminal using local boot, go directly
to the quick-start procedure in Appendix A. However, you will have only limited
access to the terminal resources.
Terminal setup information is available from help files resident on the terminals and
complete instructions are available on line after terminal-server communication is
established.
References
The following Requests for Comments (RFCs) should be reviewed:
Note
RFCs are freely available through the World-Wide
Web. They can be accessed from sites such as:
http://
www.cis.ohio-state.edu/hypertext/information/rfc.html