HP t5325 Hardware Reference Guide HP t5325 Thin Clients - Page 11
Installing the Rubber Feet
![]() |
View all HP t5325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5 Installing the Rubber Feet To install the rubber feet: 1. Remove the feet from their backing. 2. Line up the hole in each foot with a VESA hole on the bottom of the thin client. Press the foot down firmly to secure it to the thin client. NOTE: The feet provide a protective cushion between the thin client and whatever surface it sits on or is mounted to. Figure 5-1 Installing the rubber feet ENWW 5
![](/manual_guide/products/hewlettpackard-t5325-hardware-reference-guide-hp-t5325-clients-e862a86/11.png)
5
Installing the Rubber Feet
To install the rubber feet:
1.
Remove the feet from their backing.
2.
Line up the hole in each foot with a VESA hole on the bottom of the thin client. Press the foot down
firmly to secure it to the thin client.
NOTE:
The feet provide a protective cushion between the thin client and whatever surface it sits
on or is mounted to.
Figure 5-1
Installing the rubber feet
ENWW
5