HP t628 Administrator Guide 1 - Page 60
Security, Option, Description, Anonymous Identity, Username, Password, Provisioning Method, Automatic
View all HP t628 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Option Auto Connect Enable Wireless Description ● 802.1X-PEAP ● 802.1X-TLS ● EAP-FAST For WEP and WPA/WPA2-PSK, you just need to enter the network key and select OK. For EAP-FAST, set Anonymous Identity, Username, Password, and Provisioning Method. You do not need to change the PAC file settings. See Wired network settings on page 46 for more information about TTLS, PEAP, and TLS. This option is reserved for future use. Enables the wireless adapter. Use the IPv4 tab to configure IPv4 connection settings. Option IPv4 Enabled IPv4 Method Description Enables IPv4. Lets you select between Automatic and Static. If your network environment is using DHCP, then the Automatic option should work without any further configurations. If Static is selected, the Static Address Configuration settings are displayed, and you must enter the IPv4 settings. Use the IPv6 tab to configure IPv6 connection settings. Option IPv6 Enabled IPv6 Method Description Enables the usage of an IPv6 global address. NOTE: HP ThinPro tries to obtain an IPv6 global address via route advertisement or DHCPv6. Lets you select between Automatic and Static. If your network environment is using DHCP, then the Automatic option should work without any further configurations. If Static is selected, the Static Address Configuration settings are displayed, and you must enter the IPv6 settings. Use the Security tab to configure the connection security settings. Option Authentication Description Lets you set the authentication setting to one of the following: ● None ● WEP ● WPA/WPA2-PSK ● WPA/WPA2 Enterprise-TTLS ● WPA/WPA2 Enterprise-PEAP ● WPA/WPA2 Enterprise-TLS 48 Chapter 7 Control Panel