HP t628 Administrator Guide 8 - Page 57
Wireless, Option, Description, Automatic, Static, Static Address, Anonymous Identity, Username
View all HP t628 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Use the Wireless tab to configure general settings. Option Scan AP SSID Wireless Band SSID Hidden Enable IPv6 Enable Power Management Connection Method Security Settings Auto Connect Enable Wireless Description Scans for available wireless networks. Use this box to manually enter the SSID of the wireless network if it is not found by the scan. Select Auto, 2.4GHz, or 5GHz. Enable this option if the SSID of the wireless network is set to be hidden (not broadcasting). Enables IPv6. IPv4 is used by default, and they cannot be used at the same time. Enables the power management feature for the wireless adapter. Lets you select between Automatic and Static. If your network environment is using DHCP, then the Automatic option should work without any further configurations. If Static is selected, the Static Address Configuration settings will become available. Be sure to input these values according to whether you are using IPv4 or IPv6. Lets you set the authentication setting to one of the following: ● None ● WEP ● WPA/WPA2-PSK ● 802.1X-TTLS ● 802.1X-PEAP ● 802.1X-TLS ● EAP-FAST For WEP and WPA/WPA2-PSK, you just need to enter the network key and select OK. For EAP-FAST, set Anonymous Identity, Username, Password, and Provisioning Method. You do not need to change the PAC file settings. See Wired network settings on page 44 for more information about TTLS, PEAP, and TLS. This option is reserved for future use. Enables the wireless adapter. Use the IPv4 tab to configure IPv4 connection settings. Option IPv4 Enabled IPv4 Method Description Enables IPv4. Lets you select between Automatic and Static. If your network environment is using DHCP, then the Automatic option should work without any further configurations. If Static is selected, the Static Address Configuration settings are displayed, and you must enter the IPv4 settings. Use the IPv6 tab to configure IPv6 connection settings. System 45