HP tx2500z HP Pavilion tx2500 Entertainment PC - Maintenance and Service Guide - Page 75
Release the audio/infrared board, that secure the audio/infrared board to the system
![]() |
UPC - 883585947539
View all HP tx2500z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
i. System board (see System board on page 62) j. Pen holder (see Pen holder and pen eject assembly on page 65) Remove the audio/infrared board: 1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the audio/infrared board to the system board. 2. Release the audio/infrared board (2) by sliding it away from you until the connectors on the front of the board disengage from the openings in the base enclosure. 3. Remove the audio/infrared board (3). Reverse this procedure to install the audio/infrared board. Component replacement procedures 67
![](/manual_guide/products/hewlettpackard-tx2510us-hp-pavilion-tx2500-entertainment-pc-maintenance-service-guide-442832c/75.png)
i.
System board (see
System board
on page
62
)
j.
Pen holder (see
Pen holder and pen eject assembly
on page
65
)
Remove the audio/infrared board:
1.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the audio/infrared board to the system
board.
2.
Release the audio/infrared board
(2)
by sliding it away from you until the connectors on the front
of the board disengage from the openings in the base enclosure.
3.
Remove the audio/infrared board
(3)
.
Reverse this procedure to install the audio/infrared board.
Component replacement procedures
67