HP xp7000 User Guide - Page 50
Room controller commands
View all HP xp7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Room controller commands In the following tables, if the parameter listing for a particular command is "None," that command requires no parameter. Some commands are valid only when the projector is turned on, STAT=1. Some commands are available only when specific input sources are active. Source function Command Parameters Description SRC ? Queries the current active input source: 0=no active source,1=VGA-in, 3=composite video, 4=S-video, 8=DVI. RSRC 1, 3, 4, 8, ? Attempts to use the specified source as the active input source, or queries the last source requested: 1=VGA-in, 3=composite video, 4=S-video, 8=DVI. NXT None Switches to the next input source. AUTO 0, 1, ? Sets or queries automatic searching inputs for signal: 0=no searching, 1=searching. Video functions Command CSPC PMOD VSHF HSHF WHIT BRT CON SAT Parameters Description 0 to 2, ? Sets or queries the active color space: 0=RGB, 1=YPbPr, 2=YCbCr. 0,1,5,? Sets or queries the picture mode: 0=graphics, 1=video, 5=custom. value, +, -, ? Sets or queries the vertical shift of the projected image: usable range is determined by the active input source. value, +, -, ? Sets or queries the horizontal shift of the projected image: usable range is determined by the active input source. 0 to 10, +, -, ? Sets or queries the white intensity. 0 to 100, +, -, ? Sets or queries the brightness. 0 to 100, +, --, ? Sets or queries the contrast. 0 to 100, +, -, ? Sets or queries the color saturation. 50 Installing Permanently