HP xw4000 HP Z200, Z400 and xw4000 Workstations - Rack Mount Tray Installation - Page 10
HP Depth-Adjustable Fixed Rails Rack Option Kit installation instructions, Appendix
![]() |
View all HP xw4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4. Install cage nuts into the rear locations of the rack that best align with the bottom two holes at the rear of the depth-adjustable fixed rail, ensuring they are installed level with the front. 5. Insert two screws through each depth-adjustable fixed rail and into the cage nuts installed earlier, securing the rail to the rear of the rack. 6. Retighten the wing nuts on the depth-adjustable fixed rails. The rails are now ready for component installation. Refer to the documentation included with the component for complete installation instructions. NOTE: After installing the component, insert additional screws into the front depth-adjustable fixed rails for component support. 10 Appendix A HP Depth-Adjustable Fixed Rails Rack Option Kit installation instructions ENWW
![](/manual_guide/products/hewlettpackard-z210-hp-z200-z400-xw4000-workstations-rack-mount-tray-installation-1954552/10.png)