HP xw8600 HP Workstations - Dual-port NIC installation - Page 4
Step 2-Installing the dual-port NIC
![]() |
View all HP xw8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Step 2-Installing the dual-port NIC Introduction This section describes how to install the NIC in your workstation. Procedure: Installing the NIC Table 2 Installing the NIC Step Action 1 Release the PCI retainer levers by pressing them down, then out (1), as shown next. 2 Remove the applicable PCI Express slot cover (2). 3 Verify that the keyed components of the card align with the socket. Install the dual-port NIC by pressing it securely into the slot (3). 4 When the card is installed, close the PCI levers (4). 4 Dual-port NIC installation ENWW
![](/manual_guide/products/hewlettpackard-xw6600-hp-workstations-dualport-nic-installation-dc2b0ee/4.png)
Step 2—Installing the dual-port NIC
Introduction
This section describes how to install the NIC in your workstation.
Procedure: Installing the NIC
Table 2
Installing the NIC
Step
Action
1
Release the PCI retainer levers by pressing them down, then out (1), as shown next.
2
Remove the applicable PCI Express slot cover (2).
3
Verify that the keyed components of the card align with the socket.
Install the dual-port NIC by pressing it securely into the slot (3).
4
When the card is installed, close the PCI levers (4).
4
Dual-port NIC installation
ENWW