Hikvision DS-1006KI User Manual - Page 29
DVR by RS-485
![]() |
View all Hikvision DS-1006KI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
DS-1200KI/1006KI Keyboard User Manual You can also press the Num + CAM buttons to select the input channel, and operate the PTZ control. For the initial use of MAG, you must use the configuration kits software to configure the input/output channel ID of the MAG. Please see the related user manual for details. The input/output channel ID is used for switching on the video wall or PTZ control during keyboard operation. DVR by RS-485 In DVR by RS-485 mode, the keyboard screen will display a prompt message asking you to confirm your device version. If your NVR is of a 4.1.50 or later version, select Yes; otherwise, select No. If your DVR is of a 3.5.35 or later version, select Yes; otherwise, select No. Please note that selecting an incorrect device version may result in function unavailability. If you encounter a camera control problem, try to change the device ID of your NVR or DVR to a digit from 1 to 16. The keyboard can connect with the DVR/NVR via RS-485 serial port, and remotely call the device menu and realize PTZ control through the virtual panel. Before you start: Check the connection between the DVR/NVR and the Keyboard. Connect the T+ ad T- terminals of the keyboard's RS-485 serial port with the KB port on the DVR/NVR rear panel respectively. Our keyboard products support DVR/NVR with KB ports only. 22
![](/manual_guide/products/hikvision-ds1006ki-user-manual-b023232/29.png)