Hikvision DS-2CD2043G0-I User Manual - Page 106
Event Settings, 10.1 Basic Events, 10.1.1 Configuring Motion Detection,
View all Hikvision DS-2CD2043G0-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Network Camera User Manual Chapter 10 Event Settings This section explains how to configure the network camera to respond to alarm events, including basic event and smart event. Basic Events You can configure the basic events by following the instructions in this section, including motion detection, video tampering, alarm input, alarm output, and exception, etc. These events can trigger the linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm Output, etc. Note: Check the checkbox of Notify Surveillance Center if you want the alarm information to be pushed to PC or mobile client software as soon as the alarm is triggered. 10.1.1 Configuring Motion Detection Purpose: Motion detection detects the moving objects in the configured surveillance area, and a series of actions can be taken when the alarm is triggered. In order to detect the moving objects accurately and reduce the false alarm rate, normal configuration and expert configuration are selectable for different motion detection environment. Normal Configuration Normal configuration adopts the same set of motion detection parameters in the daytime and at night. Tasks 1: Set the Motion Detection Area Steps: 1. Enter the motion detection settings interface: Configuration > Event > Basic Event > Motion Detection. 2. Check the checkbox of Enable Motion Detection. 105