Hikvision DS-2CE56D0T-IR User Manual - Page 1

TURBO HD TVI Bullet Camera User Manual UD.6L0201D1935A01 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to Type Type I Model DS-2CE16D1T-IR Ty p eI I Type III DS-2CE16D1T-IT1 DS-2CE16D1T-IT3 DS-2CE16D1T-IT5 This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual. Privacy Notice Surveillance laws vary by jurisdiction. Check all relevant laws in your jurisdiction before using this product for surveillance purposes to ensure that your use of this product conforms. Please refer to the product specification for camera parameters and functions. 0100001050409 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. 1 Introduction 1.1 Product Features This series of camera adopts new generation sensor with high sensitivity and advanced circuit design technology. It features high resolution, low image distortion and low noise, etc., which makes it suitable for surveillance system and image processing system. lHigh performance CMOS sensor and high resolution bring high-quality image; lLow illumination; lOSD menu, parameters are configurable; lSupport auto white balance, auto gain control, electronic shutter control; lSupport image effect adjustment; lUnit transmission control; lAdvanced 3-axis design meets different installation requirements. 1.2 Overview 1.2.1 Overview of Type I Camera Mounting Base HD Video Cable 2 Installation Before you start: lPlease make sure that the device in the package is in good condition and all the assembly parts are included. lMake sure that all the related equipment is power-off during the installation. lCheck the specification of the products for the installation environment. lCheck whether the power supply is matched with your power output to avoid damage. lPlease make sure the wall is strong enough to withstand three times the weight of the camera and the mounting. lIf the wall is the cement wall, you need to insert expansion screws before you install the camera. If the wall is the wooden wall, you can use self-tapping screw to secure the camera. lIf the product does not function properly, please contact your dealer or the nearest service center. Do not disassemble the camera for repair or maintenance by yourself. Sun Shield Lens IR LED Power Cable 1.2.2 Overview of Type ICI amera HD Video Cable Power Cable Mounting Base Sun Shield Lens 1.2.3 Overview of Type III Camera Power Cable Sun Shield Lens HD Video Cable 2.1 Ceiling Mounting for Type I Type II/Camera Steps: 1.Drill the screw holes in the ceiling according to the supplied drill template. 2.Hammer the supplied plastic expansion bolt into the screw holes. All Screw Holes: for mounting base Figure 2-1 Drill Template 3.Route the cables to the cable hole and connect the corresponding power cable and video cable. 4.Fix the camera to the ceiling with the supplied screws.