Hikvision DS-2XE6825G0-IZHS Quick Start Guide - Page 45

Hik-Connect Setup, 6.3 Adding Camera to Hik-Connect

Page 45 highlights

Network Bullet Camera·Quick Start Guide 6.2 Hik-Connect Setup Steps: 1. Download and install the Hik-Connect app by searching "Hik-Connect" in App Store or Google PlayTM. 2. Launch the app and register for a Hik-Connect user account. 3. Log in Hik-Connect app after registration. 6.3 Adding Camera to Hik-Connect Before you start: You need to enable the Hik-Connect service on camera before adding it to your Hik-Connect account. Refer to Chapter 6.1. Steps: 1. Use a network cable to connect the camera with a router if the camera does not support Wi-Fi. Figure 6-3 Connect a Router Note: After the camera connects to the network, please wait one minute before any operation on the camera using Hik-Connect app. 2. In the Hik-Connect app, tap "+" on the upper-right corner and then scan the QR code of the camera to add the camera. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Network Bullet Camera
·
Quick Start Guide
44
6.2
Hik-Connect Setup
Steps:
1.
Download and install the Hik
-
Connect app by searching
“Hik
-
Connect” in App Store or Google Play
TM
.
2.
Launch the app and register for a Hik
-
Connect user account.
3.
Log in Hik
-
Connect app after registration.
6.3
Adding Camera to Hik-Connect
Before you start:
You need to enable the Hik
-
Connect service on camera before
adding it to your Hik
-
Connect account. Refer to Chapter 6.1.
Steps:
1.
Use a network cable to connect the camera with a router if the
camera does not support Wi
-
Fi.
Figure 6-3
Connect a Router
Note:
After the camera connects to the network, please wait one minute
before any operation on the camera using Hik
-
Connect app.
2.
In the Hik
-
Connect app, tap “+” on the upper
-
right corner and
then scan the QR code of the camera to add the camera.