Hikvision DS-2XE6885G0-IZHS Quick Start Guide - Page 34
Activating the Camera, 4.2.1 Activation via Web Browser
View all Hikvision DS-2XE6885G0-IZHS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Network Bullet Camera·Quick Start Guide 4.2 Activating the Camera You are required to activate the camera first by setting a strong password for it before you can use the camera. Activation via Web Browser, Activation via SADP, and Activation via Client Software are all supported. We will take activation via SADP software and Activation via Web Browser as examples to introduce the camera activation. Note: Refer to the User Manual of Network Camera for Activation via Client Software. 4.2.1 Activation via Web Browser Steps: 1. Power on the camera. Connect the camera to your computer or the switch/router which your computer connects to. 2. Input the IP address into the address bar of the web browser, and press Enter to enter the activation interface. Notes: The default IP address of the camera is 192.168.1.64. The computer and the camera should belong to the same subnet. For the camera enables the DHCP by default, you need to use the SADP software to search the IP address. 33