Hikvision DS-7608NXI-I2/8P/S User Manual - Page 23

Network

Get Hikvision DS-7608NXI-I2/8P/S PDF manuals and user guides View all Hikvision DS-7608NXI-I2/8P/S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Network Video Recorder User Manual Chapter 4 Network Settings Network parameters, platform access settings, and network services are configurable. 4.1 Network Parameter Settings You shall configure network parameters before using functions that require network access. 4.1.1 Configure TCP/IP TCP/IP must be properly configured before you operate video recorder over network or access network devices. Steps 1. Go to System → System Settings → Network → Network → TCP/IP . Figure 4-1 TCP/IP Settings 2. Set Working Mode and Select NIC. Multi-address The parameters of the two NIC cards can be configured independently. You can select LAN1 or LAN2 in the NIC type field for parameter settings. You can select one NIC card as default route. And then the system is connecting with the extranet and the data will be forwarded through the default route. Net-fault Tolerance The two NIC cards use the same IP address, and you can set Main NIC to LAN1 or LAN2. By this way, in case of one NIC card failure, the video recorder will automatically enable the other standby NIC card so as to ensure the normal running of the whole system. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Chapter 4 Network
Se±ngs
Network parameters,
pla³orm
access
se²ngs,
and network services are
configurable.
4.1 Network Parameter
Se±ngs
You shall
configure
network parameters before using
func°ons
that require network access.
4.1.1
Configure
TCP/IP
TCP/IP must be properly
configured
before you operate video recorder over network or access
network devices.
Steps
1.
Go to
System
→ System
Se±ngs
→ Network
→ Network
→ TCP/IP
.
Figure 4-1 TCP/IP
Se±ngs
2.
Set
Working Mode
and
Select NIC
.
Mul°-address
The parameters of the two NIC cards can be
configured
independently. You can select
LAN1
or
LAN2
in the NIC type
field
for parameter
se²ngs.
You can select one NIC card as default
route. And then the system is
connec°ng
with the extranet and the data will be forwarded
through the default route.
Net-fault Tolerance
The two NIC cards use the same IP address, and you can set
Main NIC
to
LAN1
or
LAN2
. By
this way, in case of one NIC card failure, the video recorder will
automa°cally
enable the
other standby NIC card so as to ensure the normal running of the whole system.
Network Video Recorder User Manual
6