Hisense 58H6550E Quick Start Guide - Page 16
Using Your Cable Set-top Box or Satellite Receiver
View all Hisense 58H6550E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
If your Cable or Satellite provider does not have a code available, please contact us at one of the phone numbers on Page 1. Using Your Cable Set-top Box or Satellite Receiver Remote as a 'Universal' Remote If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a 'Universal Remote', then visit the Support page to view a list of the codes. Pairing the Remote Control 1. Pair the remote to the TV after you power it on. Keep the remote control within 10 feet from the TV. Press and hold the [ ] button at least 3 seconds to start pairing. 2. If the remote paired successfully then a confirmation will display on the screen. If it did not pair successfully then an 'unsuccessful' message will display. Repeat step 1. NOTE: • If an unknown error occurred with the remote then it could have been caused by interference. Try to remove what's causing the interference and pair it again. • If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries and press any key for 1~2 seconds, then the remote control can work normally. • The remote cannot be paired to the TV while the TV is in standby mode. 12