Hitachi 32HDL52A User Manual - Page 18

English ⑨ L/ MONO / R (VIDEO 3) Connect audio of external devices.(if you have mono sound, insert the audio cable into the left (L) audio jack). ⑩ ANALOG RGB INPUT Use this 15-pin D-Sub input for your external devices with RGB output using the D-Sub Mini 15-pin cable provided. ⑪ ANALOG RGB / HDMI AUDIO IN Connect audio for ANALOG RGB and HDMI input. NOTES: In case of using analog audio, when connecting with DVI-HDMI transformation connector, use ANALOG RGB / HDMI audio terminal for input. ⑫ SUBWOOFER Output Connect this SUB WOOFER OUT output to the external audio component input. ⑬ AUDIO Output These jacks provide fixed audio signal which are used for recording. ⑭ MONITOR Output (S VIDEO) This jack provides S video signal which are used for recording. (Please refer to monitor output table as below) ⑮ MONITOR Output (VIDEO) This jack provides video and audio signals which are used for recording. (Please refer to monitor output table as below) Monitor output table: (a) Normal mode: Input Output DTV NTSC VIDEO1/ VIDEO2 VIDEO3/ VIDEO4 (VIDEO) VIDEO3/ VIDEO4 (S-VIDEO) ANALOG RGB HDMI S-VIDEO VIDEO ○ ○ × ○ × × × ○ ○ × × × × × AUDIO ○ × × (b) For POP/PIP mode: The monitor output is according to user's selected source, the speaker's position. The output table should be the same with the above table. ⑯ L/MONO /R (VIDEO 1 and VIDEO 2) Connect audio of external devices.(if you have mono sound, insert the audio cable into the left (L) audio jack). ⑰ Y-PBPR (VIDEO 1 and VIDEO 2) Provide Y-PBPR jacks for connecting equipment with this capability, such as a DVD player or Set Top Box ⑱ NTSC TUNER RF input that connects to the antenna, cable box, or CATV cable. Support NTSC TV system. ⑲ DTV TUNER RF input that connects to the antenna, cable box, or CATV cable. Support ATSC TV system. 17