Hitachi 32HDT55 Owners Guide - Page 12
RGB - Analog Input, RGB - Audio Input, DVI - HDTV - Digital Input, To Monitor, IR Blaster, Subwoofer
View all Hitachi 32HDT55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
FIRST TIME USE REAR PANEL JACKS ቨ RGB - Analog Input Use this 15-pin D-Sub input for your external devices with RGB output (see page 22). ቩ RGB - Audio Input Connect audio for RGB input (if you have mono sound, insert the audio cable into the left audio jack). ቪ DVI - HDTV - Digital Input Use this DVI Digital input for your external devices with digital output capability, such as a Set-Top-Box, high band DTV decoders and DVD players with digital content protection (see page 22). DVI is INPUT 1 and has priority over component input. When DVI is used, hook up audio to INPUT 1. NOTE: When using a Set-Top-Box, it is recommended to use a 1080i or 720p input signal. ቫ To Monitor Connect the Monitor Connection Cable to the AVC center's "TO MONITOR" connector, and to the display monitor's "FROM AVC" connector. ቭ IR Blaster This jack provides IR output to your external components (VCR, Cable box, DVD player, etc.). With this connection, your external components can automatically be controlled by the A/V network feature. This connection will allow you to control the external components with your Plasma Television's remote control in TV mode. ቮ Subwoofer Out Connect this SUB WOOFER OUT output to the external audio component input using the sub woofer cable provided. Ferrite Core Sub-woofer cable (RCA Type) ቯ To AVC Connect the Monitor Connection cable from the AVC center's "TO MONITOR" to these connectors ("FROM AVC"). ተ SUB-POWER button This power is for serviceman usage. 12