Hitachi 32PD5000 Owners Guide - Page 52


23 ˛ ▼ ˛ ˛ ˛ ˛ ▼ OPERATING INSTRUCTIONS (continued) SETUP MENU (continued) Selected characters Setup hint Auto Tuning Mode Position Direct Select the channel entry method between position setting or direct setting. And press the OK button to fix it. • If [Position] is selected, the screen display will be numbers (1~199 and AV00). • If [Direct] is selected, the screen display will be C✱✱ at the channel 0~99 and S✱✱ at the channel 100~199. Search - - Press the OK button and it starts the auto tuning. Manual Tuning Position - - Set the position number(0~199) or channel number(C✱✱, S✱✱) by ▼ ▲ PROGRAM UP/DOWN buttons. Frequency - • If [Position] has been selected, search the frequency here by - pressing buttons. • If [Direct] has been selected, this function will be not available (grayed out). Name ( :a letter) This is used to input the name of the TV station within 5 letters. After fixing the cursor on the first digit, select a letter by ▼ ▲ SELECT buttons and move to next digit by ADJUST button. Press the OK button again after finished. • Selectable letters are "0"~`"9", "A"~`"Z blank), ","(comma) and "."(period) . Sound System Auto M BG DK I Select the sound system through the 5 different settings. Color System Skip Auto PAL SECAM NTSC3.58 NTSC4.43 Off On Select the color system through the 5 different settings. If this is set to On, that position will be skipped while selecting positions by PROGRAM UP/DOWN buttons. This is automatically set to On for those non-broadcasting channels. NR Off On If this is set to On, it helps to reduce the noise interference visible on the screen, especially in the weaker signal reception areas. Fine Tuning Decreasing the frequency data for the main tuner Increasing the frequency data for the main tuner. After completing the fine-tuning, press the RETURN button to exit this mode. • The variable range is -56 ~ +56. Sort (When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).) (A Line of position List) - Press OK button at the a line that is required to change order, then - the characters will change to green. And move it up or down in the list by pressing ▼ ▲ SELECT buttons. And press OK button to complete it. Press the RETURN button to exit. Auto Off Off On If this is set to On, the power will be turned off when there is no transmission signal and no operation for about 10 minutes in the TV mode. [During VIDEO signal input] 1 item is added to the Menu shown in the page  . Selected characters Scart Output TV Monitor Setup hint TV:AV4 (Scart) output will be fixed as TV signal output. Monitor:AV4 (Scart) output can view the image as on the main unit. But it is possible to monitor only the composite video signal from AV1, AV2, or AV3 input that is displayed on the screen at the time.