Hitachi 36UX01S Owners Guide - Page 17
Connecting A Stereo Vcr Or Stereo Laserdisc Player - tv model
View all Hitachi 36UX01S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER 1. Connect the cable from the VIDEO OUT of the VCR of the laserdisc player to the INPUT (VIDEO) jack on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT(AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT(AUDIO/L) jack. 4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears automatically after approximately eight seconds. 5. Press the INPUT button to return to the previous source. INPUT 1 S-VIDEO VIDEO R L / (MONO) AUDIO S-VHS V R L OUTPUT BACK OF VCR HITACHI MODEL or similar model NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose. If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable. 17