Hitachi 42HDX60 Owners Guide - Page 12

FIRST TIME USE REAR PANEL JACKS ቨ RGB - Analog Input Use this 15-pin D-Sub input for your external devices with RGB output (see page 22). ቩ RGB - Audio Input Connect audio for RGB input (if you have mono sound, insert the audio cable into the left audio jack). ቪ DVI - HDTV - Digital Input Use this DVI Digital input for your external devices with digital output capability, such as a Set-Top-Box, high band DTV decoders and DVD players with digital content protection (see page 22). DVI is INPUT 1 and has priority over component input. When DVI is used, hook up audio to INPUT 1. NOTE: When using a Set-Top-Box, it is recommended to use a 1080i or 720p input signal. ቫ To Monitor Connect the Monitor Connection Cable to the AVC center's "TO MONITOR" connector, and to the display monitor's "FROM AVC" connector. ቭ IR Blaster This jack provides IR output to your external components (VCR, Cable box, DVD player, etc.). With this connection, your external components can automatically be controlled by the A/V network feature. This connection will allow you to control the external components with your Plasma Television's remote control in TV mode. ቮ Subwoofer Out Connect this SUB WOOFER OUT output to the external audio component input using the sub woofer cable provided. Ferrite Core Sub-woofer cable (RCA Type) ቯ To AVC Connect the Monitor Connection cable from the AVC center's "TO MONITOR" to these connectors ("FROM AVC"). ተ SUB-POWER button This power is for serviceman usage. ቱ To Power Swivel base (32" and 42" Only) Connects the plasma monitor to the power swivel base using a connection cable. NOTES: 1. 2. Squeeze both ends of the cable connector before inserting or disconnecting from the monitor and power swivel base. The monitor base and the power swivel connection cable must be disconnected before wall mount installation. 12