Hitachi 50C20 Owners Guide - Page 59
Electronic Product Stewardship Canada atwww.epsc.ca in Canada.
View all Hitachi 50C20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Lamp Replacement 6. If the lamp cover is not installed, be sure to install the lamp cover by re-engaging the two clips and tighten the screws before turning the power on, otherwise it may cause unusual colors. SCREW LAMP COVER PHILLIP HEAD SCREW DRIVER NOTE: If power is connected before the Lamp Cover is installed, the power will be off and the Lamp Indicator will flash (see page 9). 7. Install the front cover as shown below. Put the front cover back in and align the snap on quick connect then push inwards holding the left and right side of the front cover until you hear a snap. Push the other snap on gently to make a good fit. 8. Plug power cord into AC outlet and turn on the main power switch. 120V NOTE: Hg This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in accordance with applicable environmental laws. For lamp recycling and disposal information, go to www.lamprecycle.org. For product recycling and disposal information, contact your local government agency or eRecycle.org (in California), the Electronic Industries Alliance at www.eiae.org (in the US) or Electronic Product Stewardship Canada atwww.epsc.ca (in Canada). For more information, call "1-800-Hitachi". 59 Lamp Replacement