Hitachi 50UX57B Owners Guide - Page 16
Connecting A Stereo Vcr Or Stereo Laserdisc Player
![]() |
View all Hitachi 50UX57B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT(AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT(AUDIO/L) jack. 4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears automatically after approximately eight seconds. 5. Press the INPUT button to return to the previous channel. Optional, see tips on page 13 S-VHS V L R OUTPUT BACK OF VCR SS--VVIIDDEEOO1 VIDEO (MONO) L R AUDIO IINNPPUUTT1 TV INPUT TERMINAL HITACHI MODEL or similar model NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose. If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 1 in example on page 12.) Refer to your VCR operating guide for more information on line input-output connections. 16
![](/manual_guide/products/hitachi-50ux57b-owners-guide-f98a942/16.png)