Hitachi 55EX7K Owners Guide - Page 11
Antenna Connections
View all Hitachi 55EX7K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ANTENNA CONNECTIONS - 11 - should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components. Also make sure the cables are the correct length. 300-Ohm Twin Lead Connector "F" Type 75-Ohm Coaxial This outdoor antenna cable must be connected to Antenna Connector an antenna adaptor (300-Ohm to 75-Ohm). For connecting RF signals (antenna or cable TV) to the antenna jack on the television. Phono Connector S-Video (Super Video) Connector Used on all standard video and audio cables which This connector is used on camcorders, VCRs, connect to inputs and outputs located on the and laser disc players with an S- Video feature Television's front and rear jack panels. in place of the standard video cable to produce a high-quality picture. ANTENNA CONNECTIONS VHF (75- ) antenna/CATV(cable TV) When using a 75-ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the VHF/UHF 75-ohm terminal. VHF (300- ) antenna/UHF antenna When using a 300-ohm twin lead from an outdoor antenna, disconnect the VHF or UHF indoor antenna leads from screws of the VHF or UHF adaptor, and connect outdoor VHF or UHF antenna leads to these screws of the VHF or UHF adaptor.