Hitachi 55PD8800 Owners Guide - Page 56
TROUBLESHOOTING continued, Symptom and Check List continued - 55
View all Hitachi 55PD8800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
TROUBLESHOOTING (continued) Symptom and Check List (continued) Symptoms No picture The Indicating lamp → Off No picture The Indicating lamp → Orange It means that the unit is in "Power Save mode". No picture The indicating lamp → Green The top of the monitor and surface of the panel heat up. Image cannot be displayed in the correct position. When the VCR is in special playback features (Fast Forward or Rewind), the screen gets dark and cannot see the image at all. The images are not displayed on sub pictures in "Multi Picture mode" Screen display size cannot be switched correctly. Cannot be displayed the image from HDMI 1 or 2. Check list Check if the Power Cord is plugged into the socket firmly. Check if the Main Power is ON. Check if all the cables of the external equipments are connected correctly and firmly. Check if the power of the external equipments is ON. Check if the TV/AV mode has been selected correctly. Check if the PC is in Power Save mode or not. Refer to "Power Save mode" and "When following messages appears on the screen". Check if the signal cable is connected correctly and firmly. Adjust the level of Brightness and Contrast lower. It may happen when you use the unit for long hours. Turn off the Main Power of the unit for a while. Please note that this is not malfunction. Press button to check if the input signal of the displayed image is compatible with the specification of the monitor. It could happen when the VCR is connected to Component output, such as 480i. This is not malfunction. Try Composite output or S-video output and check the picture again. There are some combinations of input signals that the images are not displayed on sub pictures. Please check the Table of "2-Picture" and "4-picture/2-picture(1080i)" for details. The display size is fixed at "FULL" when the receiving signals are 1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz. Check the signal status by pressing the control. button on the remote Check if the cables are connected correctly. Check the output format of the equipments. (Please refer to "Connecting Procedure" and "Recommended Signal List".) Page 17 , 18 52 14 ~ 16 57 , 59 25 , 57 , 59 41 ~ 43 60 38 , 39 57 ~ 59 55