Hitachi 55VF820 Owners Guide - Page 40

Channel Manager Auto Channel Scan This feature will automatically store active TV channels in Auto Channel Scan memory. 1. Use the CURSOR buttons ̆ or ̄ to highlight CABLE or AIR. Channel Manager Signal Meter Auto Channel Scan Channel List Move SEL Return 2. Press the CURSOR buttons ̇ or ̈ to highlight the START or RESET option. 3. Press the SELECT button to select. NOTE: 1. When a CableCARD is installed, Auto Channel Scan for CABLE will not be available. 2. If certain channels are poor or not possible in Cable (1) mode, set cable source to Cable (2) by using the CURSOR buttons ̇ or ̈. Channel Manager Auto Channel Scan OR Cable Auto Channel Scan Start Reset Cable Source Cable(1) Air Auto Channel Scan Start Reset Move SEL Return Channel List This function allows you to review which channels are labeled (CH ID), which have been added to CHANNEL MEMORY (SCAN), which are protected by LOCK and which are your FAVORITE (FAV) CHANNELS. 1. Use the CURSOR buttons navigate the Channel List. 2. Press the SELECT button to select ON or OFF on the SCAN and LOCK Columns. 3. To select the LOCK column, input the access code. (Default access code: 0000) 4. Press the FAV button to set or remove the FAVORITES settings. 5. Press the EXIT button to return to normal viewing. NOTE: 1. When a CableCARD is installed, the Channel List will be dependent on channels agreed upon by you and your cable operator. 2. The Channel List cannot be updated by only changing the Cable Source. Auto Channel Scan must also be performed for the Channel List to be updated. Channel Manager Signal Meter Auto Channel Scan Channel List Move SEL Return INFO Channel Manager Channel List FAV CH# ❑ 6 ❑ 7 ❑ 8 ❑ 9 ❑ 10 ❑ 11 ❑ 12 ❑ 13 ■ Show name Scan On On On On On On On On 8:01 PM Lock ID Off ------- Off ------- Off ------- Off ------- Off ------- Off ------- Off ------- Off ------- 3:00PM-̈3:30PM Move SEL On/Off INFO Detail On-Screen Display 40