Hitachi 61SWX01W Owners Guide - Page 21

CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A DVD OR HDTV SET TOP BOX PLAYER WITH DOLBY DIGITAL OPTICAL OUTPUT TO INPUT 1 or 2 COMPONENT: Y-PBPR 1. Connect the cable from the Y OUT of the DVD player or HDTV Set Top Box to the INPUT (Y) jack, as shown on the TV set below. 2. Connect the cable from the CB/PB OUT or B-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (PB) jack. 3. Connect the cable from the CR/PR OUT or R-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (PR) jack. 4. Connect the cable from the OPTICAL OUTPUT of the DVD player or HDTV Set Top Box to the OPTICAL INPUT jack. 5. Press the INPUT button, to view the program from the DVD player or HDTV Set Top Bx. The VIDEO icon disappears automatically after approximately eight seconds. 6. Press the INPUT button to return to the previous channel. HDTV SET-TOP BOX DVD Player Hitachi Model or Similar Model Back of SET-TOP BOX player VIDEO OUTPUT OPTICAL OUTPUT PR PB Y OR OR Back of DVD player VIDEO OUTPUT PR/CR PB/CB Y OPTICAL OUTPUT OPTICAL INPUT COAXIAL INPUT REAR SPEAKER 8Ω ONLY ANT A TO CONVERTER S-VIDEO STOP CONNECT ONLY 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS (Such damage is NOT COVERED by your television warranty) S-VIDEO S-VIDEO R L ANT B R L AUDIO TO HI-FI SUB WOOFER VIDEO Y VIDEO Y VIDEO (MONO) L PB PR R AUDIO INPUT 1 (MONO) PB L PR R AUDIO INPUT 2 L R AUDIO MONITOR OUT NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose. 2. See page 15 for tips on REAR PANEL CONNECTIONS. 3. If your device is connected to INPUT 1 component jacks, make sure to select VID1-OPTICAL from the THEATER-INPUT SOURCE menu. If it is connected to INPUT 2 component jacks, make sure to select VID2OPTICAL from the THEATER-INPUT SOURCE menu. 21