Hitachi CML152XW User Manual - Page 12

ENGLISH Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot. After you unpack the LCD Monitor, make sure that the following items were included in the box: LCD Monitor 1.5M Monitor-to-PC signal Cable 1.5M Stereo Jack Audio Cable 1.8M Power Cord User's Manual AC Adapter If you find that any of these items is missing or appears damaged, contact your dealer immediately. Viewing Angle Adjustment The LCD Monitor is designed to allow the users to have a comfortable viewing angle. The viewing angle can be adjusted as follows: Top (-5°~ +15°) & Left / Right (-45° to +45°). +15 -5 +45 -45 Figure 1-1 WARNING Do not force the LCD Monitor over the maximum viewing angle settings as stated above. In such an event, you will damage the Monitor and a Monitor stand. Cable Installation Please follow these instructions to install the cables. 1. Remove the back panel from the rear of the monitor. (See Fig. 1-2) 2. Remove the rear support panel from the swivel base support column. (See Fig. 1-2) 3. Place the signal cable, the DC power cable and the audio cable into correct grooves (See Fig. 1-3). 12