Hitachi CMP4121HDU Owners Guide - Page 20

OPERATING INSTRUCTIONS (continued) ENGLISH AUTO button MENU button ID button VOL MUTE VOL AUTO PinP SIZE RECALL RGB 1 RGB 2 VIDEO 1 VIDEO 2 MENU RETURN ENTER ID ID SET SELECT/ADJUST buttons ENTER button ID SET button Automatic Adjustment of Screen Position and the Clock Adjustment of the screen to a position suitable for the video and the clock adjustment can be performed automatically by pressing the AUTO button of the remote control. CAUTIONS Perform this adjustment for each input (RGB1 or RGB2) and for each signal. * Depending on the signal, satisfactory adjustment may not be possible in some cases. In such case, adjust by referring to the Display Menu item. Independent Operation of Multiple Monitors (ID No) Setting the ID No. of the remote control allows separate control of up to a maximum of seven monitors. Remote control ID No. 2 (initially ID no. 1) can be set by pressing the ID SET button for 2 sec. or more while holding down the ID button. The number will be incremented (2ʜ6ˠ7ˠ1ˠ2) when this button pressed continuously. SET. ID:1 R/C. ID:1 The remote control ID no. can be checked by pressing the ID SET button while holding down the ID button. Monitor ID no. Remote control ID no. The ID remote control is operated by pressing the various buttons while holding down the ID button; Operation is possible only when the remote control and monitor ID nos. are the same. • The remote control can be operated normally by pressing the various remote control buttons without holding down the ID button. • Set the monitor using the ID No. of OTHER MENU.  Using the Menu Screen (On-screen display system) When the MENU button is pressed, the adjustment menu screen will be displayed; from there, video adjustment and setting is possible by using the SELECT button, ADJUST button and ENTER button. • Refer to  -  concerning the adjustment items and the settings. Example: Selecting the Picture screen 1. Press the MENU button to display the Main Menu screen. ʬMAIN MENUʭ MENU PICTURE SOUND DISPLAY FUNCTION OTHER SEL. ENT ENT. RTN END 2. Press the ENTER button to display the Picture Menu screen. (Use the and SELECT buttons to select other items.) ENTER ʬPICTURE MENUʭ1/2 OPERATE MODE : NORMAL CONTRAST : 127 BRIGHTNESS : 0 COLOR : 0 TINT : 0 ENHANCER : LOW FILTER : OFF RESET SEL. ENT ENT. RTN BACK 3. Use the and SELECT buttons to select the item to be adjusted and then use the and ADJUST buttons to adjust (example: COLOR). COLORɹɹɹɹɹ0 ADJɹɹɹɹɹ RTN BACK • Press the RETURN button to return to the previous screen. • If there is no operation for a period of one minute, the Adjustment Menu screen will be closed automatically.