Hitachi CMP4201U Owners Guide - Page 15
OPERATING INSTRUCTIONS continued, Audio Mute, Input Switching, Volume Adjustment
View all Hitachi CMP4201U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH OPERATING INSTRUCTIONS (continued) Volume Adjustment The volume can be adjusted by pressing the VOL+ and VOL- buttons of the remote control (or the L and M volume buttons of the monitor unit) while the on-screen display system is not being displayed. ˝˛ VOLUME buttons INPUT SELECT button Volume setting value VOLUME 15 Adjustment status guide display MUTE button RGB/VIDEO buttons VOL MUTE VOL AUTO PinP SIZE RECALL RGB 1 RGB 2 VIDEO 1 VIDEO 2 MENU RETURN ENTER ID ID SET VOLUME UP/DOWN buttons • When a button is pressed, the volume adjustment status guide will be displayed. • The volume will increase when the VOL+ (or L) button is pressed while the guide is being displayed. • The volume will decrease when the VOL- (or M) button is pressed while the guide is being displayed. • The volume can also be adjusted with the on-screen display system. Audio Mute The audio volume can be temporarily lowered to the mute volume level by pressing the MUTE button of the remote control. Volume setting value Input Switching ŋInput can be switched by pressing the RGB1, RGB2, VIDEO 1 or VIDEO 2 buttons of the remote control. ŋ Input can be switched in the sequence of RGB1 ˠ RGB2 ˠ VIDEO 1 ˠ VIDEO 2 by pressing the INPUT SELECT button of the monitor. When INPUT SELECT is pressed: RGB1 (D-sub input) RGB2 (D-sub input) VIDEO1 (composite or S input) VIDEO2 (component input) VOLUME 15 Adjustment status guide display (The display color will change to pink.) • When a button is pressed, the word MUTE (in pink) and the volume adjustment status guide will be displayed. • The volume setting can be lowered by pressing the VOL- button while the audio is muted. • The muting can be cancelled by pressing the VOL+ button while the audio is muted. • When audio is muted with the on-screen display system, the volume setting can be adjusted. When the MUTE button of the remote control is pressed again, muting will be canceled, the volume display (blue) will appear and sound will be output. • If the video unit is not installed, you cannot switch to VIDEO1 and VIDEO2. • When the same signal is input to RGB1 and RGB2, the phases may be slightly misaligned. This is not a malfunction. In such case, please change one refresh rate (Vertical frequency ) of the apparatus to be used.