Hitachi CMP4202U Owners Guide - Page 30
PRODUCT SPECIFICATIONS, Signal Input - 42
View all Hitachi CMP4202U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
PRODUCT SPECIFICATIONS Product specifications and designs are subject to change without notice. Panel Display dimensions Resolution Input terminals Input signals Video signals Sync signals Video output Signal Approx. 42 inches (922 mm (H), vertical 522 mm (V), diagonal 1059 mm) 1024 (H) x 1024 (V) pixels RGB input VIDEO input* RGB one-line two input terminals (D-sub 15-pin) Video 1 video input terminal (RCA) RGB audio two-line two input terminals Video 1 audio input terminals (left, right) (RCA) (3.5mm Stereo mini jack) Video 1 S video input terminal (S) Video 2 video input terminals (Y) (Pb/Cb) (Pr/Cr) (RCA) Video 2 audio input terminals (left, right) (RCA) 0.7 V/1.0 Vp-p, analog RGB (Recommended Signal) 1080/50i, 1080/60i VIDEO input 1 : NTSC, NTSC-4.43, M-PAL, PAL60, PAL, N-PAL, SECAM VIDEO input 2 : 480/60i, 480/60p, 720/60p, 1080/60i, 1035/60i, 576/50i, 576/50P, 1080/50i H/V separate, TTL level [2KΩ] - H/V composite, TTL level [2KΩ] - Sync on green, 0.3 Vp-p [75Ω] - - Through output (RCA) of VIDEO1 input. Recommended Signal 31 modes 16 modes Audio output terminal 10W + 10W (6Ω) Input power AC100 - 120 / 200 - 240V(automatically selected) 3.7A / 2A Power consumption 370W External dimensions 1030 (W) x 636 (H)x 89 (D) (mm) (excluding the stand) Mass 31kg (excluding the stand), 35kg (When mounted on optional stand.) Ambient conditions Temperature Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing) • The monitor takes at least 30 minutes to attain the status of optimal picture quality. This function can only be used when the optional video unit has been inserted. Signal Input RGB terminal (D-sub 15-pin connector) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Input signal R. video (PR/CR) G. video or sync on green (Y) B. video (PB/CB) No connection No connection R.GND (PR/CR, GND) G.GND (Y, GND) B.GND (PB/CB, GND) No connection GND No connection [SDA] H. sync or H/V composite sync V.sync. [V.CLK] [SCL] ( ) : With RGB component input • When different kinds of input signals are simultaneously input to the monitor via a graphics board or the like, the monitor will automatically select the signals in the following priority order: Sync signal type H/V separate sync. H/V composite sync. sync.on Green * Priority 1 2 3 *Even in the case of the recommended signals shown on the following page, there may be instances when correct display is not possible. In this case, use H/V separate sync, H/V composite sync.