Hitachi CMP4211 Owners Guide - Page 44

PRODUCT SPECIFICATIONS (continued) Signal Input RGB terminal (D-sub 15-pin connector) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Input signal R (PR/CR) G or sync on green (Y) B (PB/CB) No connection No connection R.GND (PR/CR, GND) G.GND (Y, GND) B.GND (PB/CB, GND) No connection GND No connection [SDA] H. sync or H/V composite sync V.sync. [V.CLK] [SCL] ( ) : With component input • When different kinds of input signals are simultaneously input to the monitor via a graphics board or the like, the monitor will automatically select the signals in the following priority order: Sync signal type H/V separate sync. H/V composite sync. sync.on Green * Priority 1 2 3 *Even in the case of the recommended signals shown on the following page, there may be instances when correct display is not possible. In this case, use H/V separate sync, H/V composite sync. S-input connector pin specifications Pin 1 2 3 4 Frame Input signal Y Y-GND C C-GND GND ᶅ ᶃ ᶆ ᶄ Scart connector pin specifications Pin Signal 1 AUDIO OUT (RIGHT) 2 AUDIO IN (RIGHT) 3 AUDIO OUT (LEFT/MONO) 4 AUDIO GND 5 RGB-B GND 6 AUDIO IN (LEFT/MONO) 7 RGB-B IN 8 AUDIO/RGB SWITCH / 16:9 9 RGB-G GND 10 Not Used 11 RGB-G IN Pin Signal 12 Not Used 13 RGB-R GND 14 GND 15 RGB-R / S.VHS CHROMINANCE IN 16 BLANKING SIGNAL 17 COMPOSITE VIDEO GND 18 BLANKING SIGNAL GND 19 COMPOSITE VIDEO OUT 20 COMPOSITE VIDEO / S.VHS LUMINANCE IN 21 GND / SHIELD (CHASSIS) 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 7 5 3 1